Latest Software For All Qsat Decoder: Download here

As at the time of publishing this article Qsat is working and descrambling DS** channels but its not stable freezes, goes off and on every time and its been frustrating. well we hope for a better service from them in due time. I will be dropping links to download the latest soft wares for all Qsat models of Decoders. please note only download the Software for your model dont load another software that is not for your particular model and also be careful with the up[grade because and mistake can brick your decoder.After the upgrade please make sure your reactivate your account.


DOWNLOADS

Download upgrade Software for Q11G

Download upgrade Software for Q13G

Download upgrade Software for Q23G

Download upgrade Software for Q26G

Download Upgrade Software for Q28G

How to Upgrade a Qsat Decoder

==>copy the downloaded file to your Usb virus free drive only copy the .bin file pls

==> plugin your usb to your Qsat, on your remote press MENU>>UPGRADE>>USB / UPGRADE, select the file you copied to your usb and click on ok to start the process. Once the process is completed, your decoder will reboot that is all

==>you must have a stable electricity, if your electricity is not stable, please use an a generator or other stable means of getting a stable power supply

NOTE: NOTE: NOTE:
after update your decoder might Factory reset, and it might not. But if it does factory reset it simply means its fresh as new and you need to set up your decoder from start.

Here are some guide to setting it up

1. To rescan channels on your Qsat decoder:

 goto installation>>password is 0000>>Antenna Setting>>Change Satellite to Eutelsat 36A, 36/ 036.0E>>press blue button on your remote to start scanning>>another window will pop up change scan type from manual to Blind scan>>press enter and wait till everything completes.



2. After Upgrade is your  xcam setup is missing do this: 

to reveal your Xcam setup goto>menu>>setting>> Ok button>> then dial 1512



3. To view and reactivate your  avatarcam code: 

Menu>>xcam setup>>avatarcam HD>>green button or red button



4. To display the two adult iptv channels on qsat decoder: 

goto menu>>multimedia>>network>>ok button>> dial Play button and 1513 (dial play before dialing 1513)

note: for your Qsat to work you must have an updated account