Watch Nigerian Channels like NTA, WAPTV, SILVERBIRD, CHANNEL and host of others as free to air on strong decoders.

This services is brought to us cut-cee of strong technologies company with support from MYTV.. this is a Strong's Free to view(encrypted, yet subscription free) service which has grown (more channels added and about to join) and is now accessible on non pay tv STRONG receiver models.

What it means: Any consumer having one of the below, Genuine STRONG Receivers can now enjoy subscription access to a growing number of Nigerian Channels. you would need and access card(smart card) and online registration are required to start enjoying the below channels listed.

What are the list of channels i will get from this free service

• WapTV
• Channels
• Rave TV
• KBS World
• Ait
• Silverbird
• Nta Int.
• Tele 50
• Wazobia Tv
• and more to join.

HOW CAN I SET THIS UP FROM SCRATCH.

Firstly: you must make sure you have the following free to air Receivers

SRT 4922, 4922A, 4922D+
SRT4950, SRT4950H, SRT 4950M
SRT 4930, SRT 4930L, SRT 4900
SRT4910, SRT 4669XII, SRT 4669X

Also owners of mytv decoders (SRT 4940, SRT4935, SRT4675/A & SRT 4672) Will of course have a subscription free access to the free to view channels.

Secondly: if after meeting the above requirement of having any of the above decoder, the next is to get a smart card.
How can i get the smart card? walk into any mytv shops and ask for a mytv card its almost anywhere in Nigeria or you can get one from me.

Thirdly: you need make sure your dish and decoder is set up, you need to have access to eutelsat 16 east and To receive the free to view channels you must track:

• Eutelsat 16 east
• LNB : Ku band (universal)
• frequency:12520 H 30000.

You need an accredited installer to do the set up for you if you don't have it already installed before.

Fourthly: You need to pair your smart card with your decoder. else it wont work. so you need pair the card card and the decoder together.

How do i pair my smart card to my decoder;

You need to visit this LINK and input the data that are asked or type/copy this link http://www.mytvportal.net/pairing.aspx
Then you enter the details below

• Smart Card Number: The number at the body of the card

• STB Serial Number: This is a sticker that is placed at the back of the decoder for example: 4940-1234-123456

• STB Code Number :STB Code Number (CN) is extracted from your Receiver Menu as Follows:

1. Press the MENU button on the remote control handset
2. Select SYSTEM SETTINGS
3. Select SECURITY SETTINGS
4. Enter 0000 or your own Password
5. CN will be revealed on the bottom line of the screen 

Only on Strong fta decoders that were listed above can support this new service. if you are not clear you can ask through the comment box.

Source: from http://www.strong-technologies.com/ and strong technologies official Facebook page.